petroleum refinery can be used in black engine oil, crude oil,Pyrolysis oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature of 2013 new QIE Refined Linseed Oil and Oil Refining Factory about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of Petroleum Refineryraw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then 2013 new QIE Refined Linseed Oil and Oil Refining Factory can be used again.
shandong microwave machinery co.,ltd.Petroleum RefineryIndex of oil after treatment:
Petroleum Refinerydiesel oil : 86-88%, gasoline oil: 5-6%,oil residue: 6-8%.
Petroleum RefineryLow-speed diesel engine can be used directly
Petroleum Refineryperformance characteristics,advantage introduction
Specificationsoil refining factory
2.Installation and Training Included
2013 new QIE Refined Linseed Oil and Oil Refining Factory
Production process of making Linseed Oil
A,The pretreatment refers to the process from oil seed with all kinds of impurities to oil extraction, it includes cleaning,shelling,cracking,conditioning,flaking and cooking.
B,the pretreatment is a very important section,it will directly affect the oil making effect.
The Pretreatment Machines as follows:
The leaching process refers to use a kind of solvent that can dissolve the oil ,through humidify the oil and molecular diffusion,then extract the oil from the castor seed flake.
The Linseed Oil production leaching process flow chart and the Edible oil production leaching machines as follows:
A,the first step is degum,add the phosphoric acid to the crude oil,the weight is 1‰of the oil's,the concentration is 85%.stir for 5 minutes then add hot water 80°C, weight is 4%of the oil.after stilling 120 minutes, let off the residue.
B,the second step is deacidify,as the castor oleic value is generally less than 6, so have to use a high concentration of lye.adding the lye into the oil(about 80°C)quickly,then stir,the still about 4 to 5 hours.at last let off the soapstock.
C,the third step is washing,heat the oil about 85°C,then add the same hot water that weigh 20% of oil ,then stir, still about 40 minutes is ok, generally washing 2 times.
D,the forth step is dry decoloring,The drying temperature keep 105–110 ° C, the vacuum of 0.08–0.094Mpa is a dry qualification.it have to use the dry acid clay and activated carbon, and the bleaching temperature keep about 100–110 ° C.at last filtrate after cooled to 70-80°C,then will get the refined castor oil.
The Linseed Oil production refining process flow chart and refining machines as follows:
The Degumming Machine as follows:
The Deacidify Machine as follows:
The Decoloring Machine as follows:
Our Workshop of Plant as follows:
Any Question,Welcome to Contact With Me:
Shandong Microwave Machinery Co.,Ltd.is a Petroleum Refinery factory specializing in the production of 2013 new QIE Refined Linseed Oil and Oil Refining Factory, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Petroleum Refinerycustomers with design and services of 1-2000 tons 2013 new QIE Refined Linseed Oil and Oil Refining Factory. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Petroleum Refineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Petroleum Refineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Petroleum Refineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Shandong Microwave Machinery Co.,Ltd.