1tpd-10tpd castor oil cold pressed
1.Palm Fruit Processing Line parts use high quality of imported bearing and oil seal to ensure high efficient driving, stable and low niose operation.
2.Shandong Microwave Machinery Co.,Ltd.Independent research and development of large air shaft without hoop equipment, overtuns the traditional process, make 1TPD-10TPD castor oil cold pressed more stable and reduce the cost maintenance time of Palm Fruit Processing Lineusers.
3. Add 1TPD-10TPD castor oil cold pressednon-stop refueling system, automatic system for the butter, air cooling system, high efficiency, low energy consumption, smooth operation, the Palm Fruit Processing Line quality is stable and reliable.
4. Shandong Microwave Machinery Co.,Ltd. product with high automation which can save labor, and 1TPD-10TPD castor oil cold pressed is also easy to maintain which save lots of maintance time.
1TPD-10TPD castor oil cold pressed
castor oil cold pressedProduct Description
1, castor oil cold pressed brief introduction
6YY-230 oil cold press machine can press seCARRIEe, copra, peanut, rapeseed, soybean, walnut,
almong, and so on. It uses high quality metal material such as 45# steel and 27SiMn steel forgings.
With lower power consumption and noise, it can be fed with 7-8Kg of material every time
and complete squeeze in 6-8 min. the equipment may squeeze at any time easily and make edible oil
for users at ease.
2, castor oil cold pressed technical parameters
Professional seCARRIEe oil cold press machine
|6YY-230||Vertical hydraulic||One staff, 10m2 plant||35-55kg/h||900*850*1550|
|6YY-260||Vertical hydraulic||One staff, 10m2 plant||45-70kg/h||1050*950*1650|
|6YY-360||Horizontal hydraulic||One staff, 30m2 plant||80-120kg/h||2800*800*1500|
|6YY-460||Vertical hydraulic||One staff, 30m2 plant||60-110kg/h||1000*1300*1950|
3, castor oil cold pressed advantage
Inside this professional seCARRIEe oil cold press machine, the main hydraulic driving parts are made up
of driving worm, turbine, bent axle, high-pressure pump, gear pump, one-way valve,
hydraulic cylinder, hydraulic tube, and so on. Combining domestic and overseas advanced
technology, we have designed hydraulic triple plunger pump station. It has high, stable
pressure and can produce more oil.
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil
2, We have deep cooperation with Henan Machine Design Research Institute and Henan University of
Technology. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department, project department,
electronic commerce department, domestic trade department and foreign trade department. After signing
contract, we will set up special team including engineers, installation technicians, drawing designer,
business person, after-sales service person, and so on. We will provide one-to-one service.
Whole set of equipment for production line.
Motor and power control system.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
- 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
- 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
- 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
- DTDC separated machine, the full negative pressure evaporation,
- Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
- 30-1000T/D continuous physical (chemical) refining line.
- 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
- 10-200T/D fatty acid esterification edible oil production line.
Packaging & Shipping
Shandong Microwave Machinery Co.,Ltd.is a Palm Fruit Processing Line factory specializing in the production of 1TPD-10TPD castor oil cold pressed, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Palm Fruit Processing Linecustomers with design and services of 1-2000 tons 1TPD-10TPD castor oil cold pressed. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Palm Fruit Processing Lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, seCARRIEe oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Palm Fruit Processing Lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Palm Fruit Processing Lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
shandong microwave machinery co.,ltd.