Continuous and automatic corn oil extraction machine 100T/D

Flange O.D. H(φ):57; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] 201; Flange Shape:Round Type; Bearing Retained:No; Bearing Part Number:6902; RoHS:6; Bearing Retained:No; Width T(mm):25 ～ 50; Bearing I.D. d(mm):15;

Cg - Geometry Factor:0.107; r - Cup Backface To Clear Radius1:0.06 in; Da - Cup Frontface Backing Diameter:3.90 in; Db - Cup Backface Backing Diameter:3.66 in; D:4.0000 in; C - Cup Width:0.5938 in; Series:L713000; e - ISO Factor2:0.46; Design Units:Imperial; Cup Part Number:L713010;

A1:100 mm; Cage Type:EJ; Seal:TA616; Max Oil Speed:4100; Housing Mass:14 Kg; Housing:SNT 519-616; H2:35.0 mm; N1:28 mm; Adapter Sleeve1:H316; A:145.00 mm;

T max.:100 °C; L2:10 mm; A1:12 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:T206N-; N1:16 mm; Z:52.5 mm; C:19.5 kN; L:113 mm; A:37 mm;

A5:13.9 mm; S:7.5 mm; L1:225 mm; H2:41 mm; d1:37.4 mm; B1:30.9 mm; s1:24.2 mm; SW:3 mm; Designation of housing:SP203-205/52N-; T min.:-20 °C;

Outer Ring:With Outer Ring; Sealing Structure:Brim Type; B:17; Series:No Inner Wheel; Basic Load Rating, Dynamic Rating(N):21300; Inner/Outer Ring Material:Steel; d:25; Outer Ring Type:Flat; Raceway Ring Shape:Needle Roller; Rolling Element Material:Steel;

Number of Bearings:Single; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):17; Days to Ship:8 Days; Width T(mm):13; Mount Type:Base Face Type; RoHS:6; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single;

Dynamic load, C:144 kN; Characteristic cage frequency, FTF:0.42 Hz; e:0.25; Y1:2.71; Fatigue limit load, Cu:17 kN; Da max:99 mm; Min operating temperature, Tmin:-40 °C; Static load, C0:128 kN; ra max:2 mm; rs min:2 mm;

Outer Ring:With Outer Ring; Sealing Structure:Brim Type; B:17; Series:No Inner Wheel; Basic Load Rating, Dynamic Rating(N):21300; Inner/Outer Ring Material:Steel; d:25; Outer Ring Type:Flat; Raceway Ring Shape:Needle Roller; Rolling Element Material:Steel;

T max.:100 °C; L2:10 mm; A1:12 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:T206N-; N1:16 mm; Z:52.5 mm; C:19.5 kN; L:113 mm; A:37 mm;

Flange O.D. H(φ):57; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] 201; Flange Shape:Round Type; Bearing Retained:No; Bearing Part Number:6902; RoHS:6; Bearing Retained:No; Width T(mm):25 ～ 50; Bearing I.D. d(mm):15;

ra max:1 mm; Static load, C0:6.55 kN; Nlim (grease):16,000 rpm; f0:12.2; Brand:NTN; d:17 mm; Characteristic rolling element frequency, BSF:3.39 Hz; da min:22 mm; D:47 mm; Max operating temperature, Tmax:110 °C;

A5:13.9 mm; S:7.5 mm; L1:225 mm; H2:41 mm; d1:37.4 mm; B1:30.9 mm; s1:24.2 mm; SW:3 mm; Designation of housing:SP203-205/52N-; T min.:-20 °C;

Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Seals:ZZ (Double Shield); Bearing Retained:No; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; Thickness, Height Indication:T Selection, h Confi; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; RoHS:6;

T max.:100 °C; L2:10 mm; A1:12 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:T206N-; N1:16 mm; Z:52.5 mm; C:19.5 kN; L:113 mm; A:37 mm;