Big capacity fast microwave heating ready meal machine/microwave drying machine

Z:29.2 mm; A1:44 mm; C0:32.8 kN; C:52.5 kN; Designation of housing:P212N-; N:20mm; L1:70 mm; Designation of bearing:US212G2; S:14.9 mm; A:70 mm;

Cone Part Number:15116; Cg - Geometry Factor:0.0606; Cup Part Number:15245; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0.8 mm; Series:15000; C0 - Static Radial Rating:12100 lbf; G1 - Heat Generation Factor (Roller-Raceway):14.6; C - Cup Width:14.288 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:13500 lbf;

Cone Part Number:15116; Cg - Geometry Factor:0.0606; Cup Part Number:15245; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0.8 mm; Series:15000; C0 - Static Radial Rating:12100 lbf; G1 - Heat Generation Factor (Roller-Raceway):14.6; C - Cup Width:14.288 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:13500 lbf;

Dz:110 mm; s1:27.8 mm; J1:86 mm; Z:64.4 mm; Recommended tightening torque for set screw:16.8 Nm; B:55.6 mm; H:219 mm; C0:29.2 kN; J:184 mm; T max.:200 °C;

Dz:110 mm; s1:27.8 mm; J1:86 mm; Z:64.4 mm; Recommended tightening torque for set screw:16.8 Nm; B:55.6 mm; H:219 mm; C0:29.2 kN; J:184 mm; T max.:200 °C;

m:14 mm; SW:6 mm; T max.:100 °C; r:2; Recommended tightening torque for set screw:33 Nm; B:85.7 mm; T min.:-20 °C; S:34.1 mm; C:35 mm; D:150 mm;

Dimension J:234 mm; Dimension H2:180 mm; Housing Width:4.1 in; Seal Type:Aluminium Triple Lab; Note:This product line wa; Dimension L:275 mm; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho; Cr - Dynamic Load Rating:23155 lbf; Bolt Size:2 x M16;

d1:33.3 mm; B1:31 mm; d:19.05 mm; m:5 mm; Weight:0.17 kg; G:1/4-28UNF; S:7 mm; Recommended tightening torque for set screw:3.9 Nm; C:14 mm; r:0.5;

d1:33.3 mm; B1:31 mm; d:19.05 mm; m:5 mm; Weight:0.17 kg; G:1/4-28UNF; S:7 mm; Recommended tightening torque for set screw:3.9 Nm; C:14 mm; r:0.5;

Z:29.2 mm; A1:44 mm; C0:32.8 kN; C:52.5 kN; Designation of housing:P212N-; N:20mm; L1:70 mm; Designation of bearing:US212G2; S:14.9 mm; A:70 mm;

Dz:110 mm; s1:27.8 mm; J1:86 mm; Z:64.4 mm; Recommended tightening torque for set screw:16.8 Nm; B:55.6 mm; H:219 mm; C0:29.2 kN; J:184 mm; T max.:200 °C;

B:66 mm; G:M6x1; H2:154 mm; Designation of housing:P311-; T min.:-40 °C; C:71.5 kN; N:20mm; L1:85 mm; N1:38 mm; Designation of bearing:UC311G2T04;

RoHS:6; Holder Surface Treatment:Not Provided; Bearing I.D. d(mm):15; Volume Discount:Available; Housing Material:304 Stainless Steel; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Bearing Material:Stainless Steel;