screw conveyer cement auger coal auger spiral auger wood pellets auger

L:171 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; A5:33.4 mm; s1:27.8 mm; H2:102 mm; H:146 mm; A:64 mm; SW:4.76 mm; T max.:100 °C;

H:53.9 mm; Recommended tightening torque for set screw:8 Nm; Z:24.5 mm; H2:107 mm; G:R1/8"; N:M12; Designation of bearing:UC209-26G2L3; B:49.2 mm; T min.:-20 °C; C0:20.8 kN;

A:49 mm; Weight:2.34 kg; s1:24.6 mm; N:29mm; P:300 mm; C0:20.8 kN; T max.:100 °C; C:31.85 kN; d:42.86 mm; Recommended tightening torque for set screw:8 Nm;

Fatigue limit load, Cu:0.7 kN; Da max:65.5 mm; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:3.56 Hz; B:17 mm; da min:41.5 mm; Brand:NTN; d:35 mm; f0:13.8; Static load, C0:15.3 kN;

C:35.1 kN; L:143 mm; S:19 mm; T min.:-40 °C; A1:13 mm; J:111 mm; B:51.6 mm; A:44 mm; Recommended tightening torque for set screw:16.8 Nm; G:R1/8";

Min operating temperature, Tmin:-40 °C; ra max:2 mm; E:95 mm; D:110 mm; r1s min:2 mm; Static load, C0:131 kN; Category:Bearings; Brand:NTN; Fatigue limit load, Cu:16 kN; Characteristic rolling element frequency, BSF:5.15 Hz;

Width T(mm):17; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Flange O.D. H(φ):64; Volume Discount:Available; Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Days to Ship:7 Days; Bearing I.D. d(mm):15;

Fatigue limit load, Cu:0.7 kN; Da max:65.5 mm; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:3.56 Hz; B:17 mm; da min:41.5 mm; Brand:NTN; d:35 mm; f0:13.8; Static load, C0:15.3 kN;

Series Type:Light Series; Cr - Dynamic Load Rating:103187 lbf; Cor - Static Load Rating:149273 lbf; Dimension H1:1.6 in; Housing Width:6.8 in; Bearing - Housing - Seal:LSE600BXH; Shaft Size:6 in; Dimension H2:16.3 in; Dimension L:22.0 in; Dimension K:4.7 in;

e:24 mm; A1:13 mm; C:35.1 kN; A2:51.5 mm; B1:55 mm; A:41.6 mm; T max.:100 °C; B:31 mm; Designation of bearing:UK210G2H-28; Weight:2.25 kg;

L:171 mm; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; A5:33.4 mm; s1:27.8 mm; H2:102 mm; H:146 mm; A:64 mm; SW:4.76 mm; T max.:100 °C;

C:35.1 kN; L:143 mm; S:19 mm; T min.:-40 °C; A1:13 mm; J:111 mm; B:51.6 mm; A:44 mm; Recommended tightening torque for set screw:16.8 Nm; G:R1/8";

A:49 mm; Weight:2.34 kg; s1:24.6 mm; N:29mm; P:300 mm; C0:20.8 kN; T max.:100 °C; C:31.85 kN; d:42.86 mm; Recommended tightening torque for set screw:8 Nm;

C:35.1 kN; L:143 mm; S:19 mm; T min.:-40 °C; A1:13 mm; J:111 mm; B:51.6 mm; A:44 mm; Recommended tightening torque for set screw:16.8 Nm; G:R1/8";

C:35.1 kN; L:143 mm; S:19 mm; T min.:-40 °C; A1:13 mm; J:111 mm; B:51.6 mm; A:44 mm; Recommended tightening torque for set screw:16.8 Nm; G:R1/8";