Salable Pumpkin seed desheller, deshelling machine BGZ300

b min:0.95 mm; r0 max:0.25 mm; f0:14.8; Static load, C0:2 kN; d:15 mm; Min operating temperature, Tmin:-20 °C; ra max:0.3 mm; B:7 mm; Da max:26 mm; Fatigue limit load, Cu:0.09 kN;

Accessory:With cast iron cover; Fit:J7; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Basic Load Rating, Static Rating(N):36200; RoHS:6; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Basic Load Rating, Dynamic Rating(N):52400;

Bearing Number:22215; C - Dynamic Load (Basic):49900 lb; Shaft Size Type:Metric; C0 - Static Load:54100 lb; Y2 - Geometry Factor:4.67; Grease Lubrication - B/C/O Seal:1300 rpm; UPC Code:0883450026000; Eng Internal Radial Clearance - Max:0.0031; e - Geometry Factor:0.22; Dimension SAA:4.74 in;

Seal, Shield Symbols:No; Type symbol:No; Outer Ring:With Outer Ring; Outer Ring Shape:Flat; Preload:Light Preload; Holder Symbol:TYN; Width(mm):24; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):71500; Combination of Angular Contact Ball Bearings:Back Combination;

Seal:No; Bearing Unit, Type:Diamond Flange Shape; Unit, Type:Bearing unit; B:130; Surface Treatment:No; Unit, Type:Bearing unit; Surface Treatment:No; d:25; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):7850;

C90 - Dynamic Radial Rating (90 million revolutions)5:160000 lbf; Series:655000; db - Cone Backface Backing Diameter:28.46 in; R - Cone Backface To Clear Radius3:0.25 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:279000 lbf; da - Cone Frontface Backing Diameter:28.11 in; G2 - Heat Generation Factor (Rib-Roller End):1202.6; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:1080000 lbf; G1 - Heat Generation Factor (Roller-Raceway):11800; Cone Part Number:EE655270;

Seal, Shield Symbols:No; Type symbol:No; Outer Ring:With Outer Ring; Outer Ring Shape:Flat; Preload:Light Preload; Holder Symbol:TYN; Width(mm):24; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):71500; Combination of Angular Contact Ball Bearings:Back Combination;

Shaft Bore Config.:Cylindrical Bore; Retainer Type:Momi removing; Series:ULTAGE type EM; Load Direction:Radial; Size Standards:Metric System; Rolling Element Material:Steel; D:250; Revolution Frequency(rpm):1300; Outer Ring Type:Flat; Internal Clearance Symbol:C3;

ra max:3 mm; Mass:34.13 kg; Brand:SNR; Characteristic cage frequency, FTF:0.41 Hz; Y0:1.98; b:18.9 mm; Static load, C0:1,720 kN; Fatigue limit load, Cu:129 kN; Number of lubrication holes:3; Y2:3.02;

ra max:3 mm; Mass:34.13 kg; Brand:SNR; Characteristic cage frequency, FTF:0.41 Hz; Y0:1.98; b:18.9 mm; Static load, C0:1,720 kN; Fatigue limit load, Cu:129 kN; Number of lubrication holes:3; Y2:3.02;

ra max:3 mm; Mass:34.13 kg; Brand:SNR; Characteristic cage frequency, FTF:0.41 Hz; Y0:1.98; b:18.9 mm; Static load, C0:1,720 kN; Fatigue limit load, Cu:129 kN; Number of lubrication holes:3; Y2:3.02;

Bearing UPC:013992027405; Dimension R:16.2 in; Cor - Static Load Rating:149273 lbf; Bearing Type:Split Cylindrical Re; Bolt Size:4 x M24; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992100184; Note:This product line wa; Cr - Dynamic Load Rating:103187 lbf; Dimension L:7.9 in;

Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):20; Bearing Retained:No; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Number of Bearings:Single; Bearing Retained:No; Days to Ship:8 Days; Shape:Flange Type; RoHS:6;

Accessory:With cast iron cover; Fit:J7; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Basic Load Rating, Static Rating(N):36200; RoHS:6; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Basic Load Rating, Dynamic Rating(N):52400;

Seal Type:Kevlar Packing Seal; Cr - Dynamic Load Rating:23118 lbf; Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:25848 lbf; Bearing Type:Split Cylindrical Re; Dimension J1 :9-5/8 in; Bearing UPC:013992025920; Shaft Size:2.5 in; Maximum Speed:3940 rpm; Dimension J2 :8-5/8 in;