hot sale Chocolate refiner/chocolate conche 0086-18638277628

Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Fit:J7; Bearing Unit, Type:Pillow Type;

s1:21.45 mm; B:42.9 mm; T min.:-40 °C; Recommended tightening torque for set screw:11.5 Nm; N:11,5mm; G:M6x1; L:135 mm; H3:90; C:25.7 kN; C0:15.2 kN;

E:9.570 in; Q:0.115 in; Weight:1.180 lb; No. of Tangs:19; X:8.327 in; R:8.701 in; T:0.770 in; B:10.406 in; S:0.945 in;

Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Fit:J7; Bearing Unit, Type:Pillow Type;

Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Fit:J7; Bearing Unit, Type:Pillow Type;

E:9.570 in; Q:0.115 in; Weight:1.180 lb; No. of Tangs:19; X:8.327 in; R:8.701 in; T:0.770 in; B:10.406 in; S:0.945 in;

D:3.1562 in; Series:3300; e - ISO Factor3:0.27; Design Units:Imperial; Y - ISO Factor4:2.2; Da - Cup Frontface Backing Diameter:3.05 in; Cup Part Number:3320-B; r - Cup Backface To Clear Radius1:0.130 in; Cg - Geometry Factor5:0.0744; K - Factor2:2.14;

E:9.570 in; Q:0.115 in; Weight:1.180 lb; No. of Tangs:19; X:8.327 in; R:8.701 in; T:0.770 in; B:10.406 in; S:0.945 in;

Recommended tightening torque for set screw:8 Nm; Weight:2.06 kg; H:181 mm; A1:18 mm; L:108 mm; C:31.85 kN; G:M6x1; A2:52.2 mm; B:49.2 mm; C0:20.8 kN;

s1:21.45 mm; B:42.9 mm; T min.:-40 °C; Recommended tightening torque for set screw:11.5 Nm; N:11,5mm; G:M6x1; L:135 mm; H3:90; C:25.7 kN; C0:15.2 kN;

Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Number of Bearings:Double; Bearing Retained:No; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Number of Bearings:Double; Seals:ZZ (Double Shield); Type:Bearings with Housin; Width T(mm):35 ～ 70;

s1:21.45 mm; B:42.9 mm; T min.:-40 °C; Recommended tightening torque for set screw:11.5 Nm; N:11,5mm; G:M6x1; L:135 mm; H3:90; C:25.7 kN; C0:15.2 kN;

E:9.570 in; Q:0.115 in; Weight:1.180 lb; No. of Tangs:19; X:8.327 in; R:8.701 in; T:0.770 in; B:10.406 in; S:0.945 in;

Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Fit:J7; Bearing Unit, Type:Pillow Type;