200t continous refining of salad oil

Surface Treatment:No; Basic Load Rating, Static Rating(N):15000; Fit:J7; Unit Body Material:Cast Iron; Machining:No; Rolling Element Material:Bearing Steel; Accessory:With cast iron cover; Fit:J7; Rolling Element Material:Bearing Steel; Surface Treatment:No;

A5:19.7 mm; d:22.22 mm; N:19mm; Designation of open end cover:SCOU205-14; H1:76 mm; S:14.3 mm; L:97 mm; N1:16 mm; Designation of closed end cover:SCC205; L2:10 mm;

Pillow Type, Category:Standard; Unit, Type:Insert Bearing Unit; Grease Type:SH44M; Bearing Unit, Type:Pillow Type; Unit Body Material:Cast Iron; Surface Treatment:No; Rolling Element Material:Bearing Steel; Surface Treatment:No; RoHS:6; Rolling Element Material:Bearing Steel;

Surface Treatment:No; Basic Load Rating, Static Rating(N):15000; Fit:J7; Unit Body Material:Cast Iron; Machining:No; Rolling Element Material:Bearing Steel; Accessory:With cast iron cover; Fit:J7; Rolling Element Material:Bearing Steel; Surface Treatment:No;

T min.:-40 °C; Designation of bearing:US203-11G2T04; d:17.46 mm; S:6 mm; Z:13.5 mm; SW:2.38 mm; Recommended tightening torque for set screw:3.2 Nm; C:9.55 kN; L:264 mm; H2:41 mm;

Surface Treatment:No; Basic Load Rating, Static Rating(N):15000; Fit:J7; Unit Body Material:Cast Iron; Machining:No; Rolling Element Material:Bearing Steel; Accessory:With cast iron cover; Fit:J7; Rolling Element Material:Bearing Steel; Surface Treatment:No;

Surface Treatment:No; Basic Load Rating, Static Rating(N):15000; Fit:J7; Unit Body Material:Cast Iron; Machining:No; Rolling Element Material:Bearing Steel; Accessory:With cast iron cover; Fit:J7; Rolling Element Material:Bearing Steel; Surface Treatment:No;

A1:13 mm; S:19 mm; A2:54.2 mm; A:40 mm; d:45 mm; C0:20.8 kN; Designation of bearing:UC209G2T20; Z:58.4 mm; Dz:95 mm; T min.:-20 °C;

Lateral Width L(mm):82; Mount Type:Base Face Type; Height H(mm):40 ～ 60; Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Shape:T-Shaped; Type:Bearings with Housin; RoHS:6;

Designation of housing:PG205-; C0:7.88 kN; S:17.4 mm; d1:37.4 mm; C:14 kN; H1:15 mm; s1:30.9 mm; E:18 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C;

T min.:-40 °C; Designation of bearing:US203-11G2T04; d:17.46 mm; S:6 mm; Z:13.5 mm; SW:2.38 mm; Recommended tightening torque for set screw:3.2 Nm; C:9.55 kN; L:264 mm; H2:41 mm;

Days to Ship:8 Days; Bearing Retained:Yes (with retaining; Width T(mm):15; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Height H(mm):20 ～ 30; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; RoHS:6;

A5:19.7 mm; d:22.22 mm; N:19mm; Designation of open end cover:SCOU205-14; H1:76 mm; S:14.3 mm; L:97 mm; N1:16 mm; Designation of closed end cover:SCC205; L2:10 mm;

T min.:-40 °C; Designation of bearing:US203-11G2T04; d:17.46 mm; S:6 mm; Z:13.5 mm; SW:2.38 mm; Recommended tightening torque for set screw:3.2 Nm; C:9.55 kN; L:264 mm; H2:41 mm;

Lateral Width L(mm):82; Mount Type:Base Face Type; Height H(mm):40 ～ 60; Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Shape:T-Shaped; Type:Bearings with Housin; RoHS:6;