tunnel Microwave type microwave culture medium sterilization equipment

Z:21.5 mm; d:36.51 mm; C0:15.2 kN; A1:27 mm; N:14mm; S:17.5 mm; H2:93 mm; A:45 mm; G:R1/8"; Recommended tightening torque for set screw:8 Nm;

d1:32.4 mm; B1:30.9 mm; L1:21 mm; B:21.4 mm; A1:20 mm; A:38 mm; H1:14 mm; S:7.5 mm; E:16 mm; H:33.3 mm;

Z:21.5 mm; d:36.51 mm; C0:15.2 kN; A1:27 mm; N:14mm; S:17.5 mm; H2:93 mm; A:45 mm; G:R1/8"; Recommended tightening torque for set screw:8 Nm;

A:49 mm; N:29mm; Weight:2.74 kg; A1:16 mm; d1:67.2 mm; L:149 mm; H:117 mm; L3:86 mm; SW:3.97 mm; H2:83 mm;

s:36 mm; D3:560 mm; i:27 mm; Suitable Lockplate No.:MS3188; Weight:45.30 Kg; D4:510 mm; Thread D11:Tr440x5; T:20 mm; Bn:70 mm; Tapped Hole Threads:M16x2;

d1:32.4 mm; B1:30.9 mm; L1:21 mm; B:21.4 mm; A1:20 mm; A:38 mm; H1:14 mm; S:7.5 mm; E:16 mm; H:33.3 mm;

Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Round flange shape; Surface Treatment:No; Diameter series symbol:Used for Light load; Basic Load Rating, Dynamic Rating(N):96100; Basic Load Rating, Static Rating(N):71500; Seal:Triple seals; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:Standard Grease; Accessory:No Cover;

Bore:0.984 Inch | 25 Mill; f0:13.9; Mass:0.13 kg; Noun:Bearing; Min operating temperature, Tmin:-20 °C; Outside Diameter:2.047 Inch | 52 Mill; Weight / LBS:0.39; Other Features:Deep Groove | Cartri; UNSPSC:31171504;

Bearing I.D. d(mm):20; Housing Material:304 Stainless Steel; Holder Surface Treatment:Not Provided; Seals:DD (Contact Rubber S; Flange O.D. H(φ):72; Bearing Part Number:6904; Width T(mm):45 ～ 70; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Material:[Steel] Steel;

s:36 mm; D3:560 mm; i:27 mm; Suitable Lockplate No.:MS3188; Weight:45.30 Kg; D4:510 mm; Thread D11:Tr440x5; T:20 mm; Bn:70 mm; Tapped Hole Threads:M16x2;

G:R1/8"; L:99 mm; A2:35 mm; s1:13.5 mm; L3:38 mm; H:70 mm; L1:64 mm; C:14 kN; B:27 mm; A5:19.5 mm;

s:36 mm; D3:560 mm; i:27 mm; Suitable Lockplate No.:MS3188; Weight:45.30 Kg; D4:510 mm; Thread D11:Tr440x5; T:20 mm; Bn:70 mm; Tapped Hole Threads:M16x2;

A:49 mm; N:29mm; Weight:2.74 kg; A1:16 mm; d1:67.2 mm; L:149 mm; H:117 mm; L3:86 mm; SW:3.97 mm; H2:83 mm;

Bearing I.D. d(mm):20; Housing Material:304 Stainless Steel; Holder Surface Treatment:Not Provided; Seals:DD (Contact Rubber S; Flange O.D. H(φ):72; Bearing Part Number:6904; Width T(mm):45 ～ 70; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Material:[Steel] Steel;

S:19 mm; T max.:100 °C; Designation of closed end cover:SCC209; C0:20.8 kN; T min.:-20 °C; C:31.85 kN; s1:24.6 mm; J:150 mm; d:44.45 mm; B:49.2 mm;