stainless steel potato tower crane

D:3.1562 in; Series:3300; e - ISO Factor3:0.27; Design Units:Imperial; Y - ISO Factor4:2.2; Da - Cup Frontface Backing Diameter:3.05 in; Cup Part Number:3320-B; r - Cup Backface To Clear Radius1:0.130 in; Cg - Geometry Factor5:0.0744; K - Factor2:2.14;

A:34 mm; e:19 mm; A2:42.5 mm; T min.:-40 °C; Designation of closed end cover:SCC207; L1:82 mm; N:15mm; J1:66 mm; H:161 mm; A1:16 mm;

s1:21.45 mm; B:42.9 mm; T min.:-40 °C; Recommended tightening torque for set screw:11.5 Nm; N:11,5mm; G:M6x1; L:135 mm; H3:90; C:25.7 kN; C0:15.2 kN;

T min.:-20 °C; L:165 mm; Designation of bearing:UC210G2; d:50 mm; A2:42.6 mm; Dz:100 mm; Weight:2.92 kg; Designation of closed end cover:SCC210; B:51.6 mm; J:138 mm;

ras max:0.3 mm; B:10.5 mm; F:10 mm; Lubrication hole on inner ring:Non/No; Brand:NTN; t:1 mm; d:7 mm; da min:9 mm; rs min:0.3 mm; Precision class:P0;

C0:29.2 kN; B:55.4 mm; S:27.7 mm; L:219 mm; Designation of housing:P211N-; G:M6x1; N:20mm; Recommended tightening torque for set screw:22 Nm; T min.:-20 °C; A:60 mm;

T min.:-20 °C; L:165 mm; Designation of bearing:UC210G2; d:50 mm; A2:42.6 mm; Dz:100 mm; Weight:2.92 kg; Designation of closed end cover:SCC210; B:51.6 mm; J:138 mm;

ras max:0.3 mm; B:10.5 mm; F:10 mm; Lubrication hole on inner ring:Non/No; Brand:NTN; t:1 mm; d:7 mm; da min:9 mm; rs min:0.3 mm; Precision class:P0;

T min.:-20 °C; L:165 mm; Designation of bearing:UC210G2; d:50 mm; A2:42.6 mm; Dz:100 mm; Weight:2.92 kg; Designation of closed end cover:SCC210; B:51.6 mm; J:138 mm;

E:9.570 in; Q:0.115 in; Weight:1.180 lb; No. of Tangs:19; X:8.327 in; R:8.701 in; T:0.770 in; B:10.406 in; S:0.945 in;

Days to Ship:8 Days or more; Number of Bearings:Double; S(mm):20 ～ 117; Holder Width(inch):71 ～ 140; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Retained:No; Bearing Part Number:6906;

A1:6 mm; d:17.46 mm; e:10 mm; H3:62; A2:26 mm; C0:4.78 kN; A4:20.5 mm; L:100 mm; Recommended tightening torque for set screw:3.2 Nm; B:22 mm;

Unit Body Material:Cast Iron; Machining:No; Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; Stroke:No; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Fit:J7; Fit:J7; Bearing Unit, Type:Pillow Type;

A1:6 mm; d:17.46 mm; e:10 mm; H3:62; A2:26 mm; C0:4.78 kN; A4:20.5 mm; L:100 mm; Recommended tightening torque for set screw:3.2 Nm; B:22 mm;

A:34 mm; e:19 mm; A2:42.5 mm; T min.:-40 °C; Designation of closed end cover:SCC207; L1:82 mm; N:15mm; J1:66 mm; H:161 mm; A1:16 mm;