Active Demand in India Copra oil extraction machine

RoHS:6; Seals:VV (Non-Contact Rubb; Shape:T-Shaped; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea;

Designation of housing:PH205-; Recommended tightening torque for set screw:5.5 Nm; d:25 mm; A:50 mm; H1:16 mm; H2:114 mm; T max.:100 °C; C:14 kN; L1:50 mm; H:80 mm;

Designation of housing:PH205-; Recommended tightening torque for set screw:5.5 Nm; d:25 mm; A:50 mm; H1:16 mm; H2:114 mm; T max.:100 °C; C:14 kN; L1:50 mm; H:80 mm;

Material:52100 Steel; Size Unit:Inch; Diameter(inch):2-1/2; Material:52100 Steel; Size Unit:Inch; Days to Ship:8 Days;

Material:52100 Steel; Size Unit:Inch; Diameter(inch):2-1/2; Material:52100 Steel; Size Unit:Inch; Days to Ship:8 Days;

B1:73 mm; A5:27.8 mm; A3:3.5 mm; B:55.6 mm; d1:83 mm; T min.:-20 °C; A:44 mm; s1:50 mm; G:M6x1; Weight:4.49 kg;

B1:73 mm; A5:27.8 mm; A3:3.5 mm; B:55.6 mm; d1:83 mm; T min.:-20 °C; A:44 mm; s1:50 mm; G:M6x1; Weight:4.49 kg;

Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; Da - Cup Frontface Backing Diameter:271.30 mm; K - Factor7:1.83; a - Effective Center Location3:-11.7 mm; db - Cone Backface Backing Diameter:204.98 mm; Cup Part Number:HM237510; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:5.1 mm; Cone Part Number:HM237545; Series:HM237500;

Material:52100 Steel; Size Unit:Inch; Diameter(inch):2-1/2; Material:52100 Steel; Size Unit:Inch; Days to Ship:8 Days;

Fit:J7; Grease Type:Standard Grease; Surface Treatment:No; Diameter series symbol:Used for Light load; Accessory:With steel plate cov; Fit:J7; Seal:Nitrile; Pillow Type, Category:Standard; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel;

Designation of housing:PH205-; Recommended tightening torque for set screw:5.5 Nm; d:25 mm; A:50 mm; H1:16 mm; H2:114 mm; T max.:100 °C; C:14 kN; L1:50 mm; H:80 mm;

Designation of bearing:US207-23G2; d:36.51 mm; T min.:-20 °C; T max.:100 °C; A:36 mm; A2:44.5 mm; L:118 mm; A1:12.5 mm; J:92 mm; Designation of housing:FE207N-;

RoHS:6; Seals:VV (Non-Contact Rubb; Shape:T-Shaped; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea;

Designation of housing:PH205-; Recommended tightening torque for set screw:5.5 Nm; d:25 mm; A:50 mm; H1:16 mm; H2:114 mm; T max.:100 °C; C:14 kN; L1:50 mm; H:80 mm;