1.5 KW Peanut Coating Machine For Various Grain Food , Fried Peanut

J:170.5 mm; L:219.5 mm; A:60 mm; d:55 mm; Dz:110 mm; S:22.2 mm; H2:128 mm; G:M6x1; H:61.3 mm; B:55.6 mm;

T max.:100 °C; C0:11.2 kN; Z:52.3 mm; Dz:70 mm; L1:25 mm; A:48 mm; Designation of closed end cover:SCC206; H1:17 mm; Recommended tightening torque for set screw:3.7 Nm; H2:83 mm;

N:35mm; s1:27.8 mm; Designation of bearing:UC211-34G2; H2:102 mm; A5:33.4 mm; L3:95 mm; G:M6x1; d:53.98 mm; S:22.2 mm; SW:4.76 mm;

Shape:T-Shaped; Lateral Width L(mm):104; RoHS:6; Seals:ZZ (Double Shield); Shape:T-Shaped; Height H(mm):40 ～ 80; Bearing Used:Deep Groove Ball Bea; Mount Type:Base Face Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;

B1:72.5 mm; N:23mm; G:R1/8"; Recommended tightening torque for set screw:33 Nm; S:24.5 mm; d1:120 mm; Designation of housing:FE218-; J:187 mm; C0:71.5 kN; Weight:10.9 kg;

ra max:0.6 mm; Static load, C0:4.6 kN; Max operating temperature, Tmax:120 °C; Characteristic rolling element frequency, BSF:3.78 Hz; Brand:NTN; Da max:36 mm; Characteristic outer ring frequency, BPF0:2.63 Hz; Characteristic cage frequency, FTF:0.38 Hz; rs min:0.6 mm; D:40 mm;

L:172.00 mm; Lockwasher and Lockplates:MS 48; Thread G:Tr240x4; D3:300 mm; Appropriate Hydraulic Nut:HMV48; Weight:17.60 Kg; d1:220.00 mm; C:37 mm; Locknut:HM48T;

J:170.5 mm; L:219.5 mm; A:60 mm; d:55 mm; Dz:110 mm; S:22.2 mm; H2:128 mm; G:M6x1; H:61.3 mm; B:55.6 mm;

Shape:T-Shaped; Lateral Width L(mm):104; RoHS:6; Seals:ZZ (Double Shield); Shape:T-Shaped; Height H(mm):40 ～ 80; Bearing Used:Deep Groove Ball Bea; Mount Type:Base Face Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;

Type:Bearings with Housin; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Mount Type:Key Groove Type; Number of Bearings:Single; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Height H(mm):30 ～ 50;

C0 - Static Radial Rating:312000 lbf; T - Bearing Width to Flange:1.4375 in; C1 - Cup Flange Width:0.5000 in; D:17.5 in; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:0.34 in; C1 - Dynamic Radial Rating (1 million revolutions)5:199000 lbf; Series:290000; Cg - Geometry Factor11:0.156; Da - Cup Frontface Backing Diameter:16.87 in;

N:35mm; s1:27.8 mm; Designation of bearing:UC211-34G2; H2:102 mm; A5:33.4 mm; L3:95 mm; G:M6x1; d:53.98 mm; S:22.2 mm; SW:4.76 mm;

L:172.00 mm; Lockwasher and Lockplates:MS 48; Thread G:Tr240x4; D3:300 mm; Appropriate Hydraulic Nut:HMV48; Weight:17.60 Kg; d1:220.00 mm; C:37 mm; Locknut:HM48T;

Seals:VV (Non-Contact Rubb; Bearing Retained:No; Bearing Retained:No; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6900; Bearing I.D. d(mm):10; Days to Ship:7 Days; Number of Bearings:Double;