LD microwave drying and sterilization equipment/machine -- spice / cumin / cinnamon / etc

Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Cover Type:No; Basic Load Rating, Dynamic Rating(N):12800; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Static Rating(N):6650; Unit, Type:Bearing unit; B:89; Unit Body Material:Cast Iron;

d:63.5 mm; SW:5.56 mm; B:75 mm; T min.:-20 °C; Recommended tightening torque for set screw:27.1 Nm; C0:60.5 kN; C:38 mm; G:7/16-20UNF; m:12 mm; r:2;

A1:150 mm; N1:42.00 mm; H2:50.0 mm; Seal Type:Taconite; Bearing:22228; H:302 mm; A3:285 mm; Housing Mass:39 Kg; Seal:TA228; End Cover1:EC528;

Designation of bearing:EX212-36G2L3; T max.:100 °C; T min.:-20 °C; N:18mm; d:57.15 mm; A:30.5 mm; B1:77.7 mm; C:52.5 kN; Recommended tightening torque for set screw:16.8 Nm; S:30.9 mm;

s1:21.45 mm; E:22 mm; L1:35 mm; C0:15.2 kN; B:42.9 mm; T max.:100 °C; C:25.7 kN; Designation of bearing:UC207-22G2; N:M12; A1:27 mm;

Limiting Speed:570 rpm; r - Fillet Chamfer:6.4 mm; Static Load Rating:15600 kN; Dynamic Load Rating:3000 kN; D - Bearing O.D.:762.000 mm; E - Shoulder Diameter - Housing:533.4 mm; H - Shoulder Diameter - Shaft:736.6 mm; B:139.700 mm; Weight:91.7 Kg; D1 - Small Diameter O.D.:758.80 mm;

Rolling Element Material:Bearing Steel; Machining:No; Stroke:No; Cover Type:No; Lubrication method:Oil-Free Type; Fit:J7; Basic Load Rating, Static Rating(N):7850; Grease Type:Standard Grease; d:25; Basic Load Rating, Dynamic Rating(N):14000;

d:63.5 mm; SW:5.56 mm; B:75 mm; T min.:-20 °C; Recommended tightening torque for set screw:27.1 Nm; C0:60.5 kN; C:38 mm; G:7/16-20UNF; m:12 mm; r:2;

Dimension J (Bolt Size):0.750 in; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - B/C/O Seal:1100 rpm; C0 - Static Load:71900 lb; C - Dynamic Load (Basic):66900 lb; Y2 - Geometry Factor:4.57; Full Timken Part Number:DVP17K215SB; Dimension S:3.23 in; Shaft Tolerance:0.0040 in; Dimension D Min:7.88 in;

s1:21.45 mm; E:22 mm; L1:35 mm; C0:15.2 kN; B:42.9 mm; T max.:100 °C; C:25.7 kN; Designation of bearing:UC207-22G2; N:M12; A1:27 mm;

Rolling Element Material:Bearing Steel; Machining:No; Stroke:No; Cover Type:No; Lubrication method:Oil-Free Type; Fit:J7; Basic Load Rating, Static Rating(N):7850; Grease Type:Standard Grease; d:25; Basic Load Rating, Dynamic Rating(N):14000;

Rolling Element Material:Bearing Steel; Machining:No; Stroke:No; Cover Type:No; Lubrication method:Oil-Free Type; Fit:J7; Basic Load Rating, Static Rating(N):7850; Grease Type:Standard Grease; d:25; Basic Load Rating, Dynamic Rating(N):14000;

A1:11 mm; Recommended tightening torque for set screw:3.7 Nm; L:95 mm; T max.:100 °C; A2:42.4 mm; s1:24.2 mm; Designation of bearing:ES205-15G2T04; N:11,5mm; C0:7.88 kN; S:7.5 mm;

Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):60; Volume Discount:Available; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Width T(mm):9; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating;