High Quality Stainless Steel Industrial Microwave Oven

Design Units:Imperial; R - Cone Backface To Clear Radius3:0.14 in; Series:26000; K - Factor8:1.62; G2 - Heat Generation Factor (Rib-Roller End):10.1; d:1.3125 in; Cone Part Number:26131; Ab - Cage-Cone Frontface Clearance:0.09 in; B - Cone Width:0.7450 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2500 lbf;

Shaft Diameter da:45 mm; H:128 mm; Housing:FSNT 511-609; Housing Mass:4.5 Kg; J2:234 mm; Bolt Qty:2; Locating Rings (width x OD):SR100X9.5; H1:70.0 mm; H2:28.00 mm; Max Grease Speed:5300;

Shaft Diameter da:45 mm; H:128 mm; Housing:FSNT 511-609; Housing Mass:4.5 Kg; J2:234 mm; Bolt Qty:2; Locating Rings (width x OD):SR100X9.5; H1:70.0 mm; H2:28.00 mm; Max Grease Speed:5300;

Designation of closed end cover:SCC205; A:21 mm; T max.:100 °C; G:R1/8"; T min.:-40 °C; d:22.22 mm; C:14 kN; Weight:1.55 kg; H:78 mm; Designation of housing:SP203-205/52N-;

Bearing - Housing - Seal:MSE311BXHHTPS; Cor - Static Load Rating:110381 lbf; Seal Type:High Temperature Pac; Series Type:Medium Series; Dimension P:0.9 in; Dimension H:3.6 in; Dimension T:15.0 in; Dimension N:10.875 in; Bolt Size:4 x M16; Bearing - Housing - Seal UPC:013992089403;

Support Type:Take-Up; Dimension H:2.0 in; Series Type:Light Series; Note:This product line wa; Maximum Speed:1740 rpm; Dimension N:16.5 in; Dimension T:20.0 in; Ca - Axial Load Rating:4990.69 lbf; Dimension X:1.7 in; Bearing Type:Split Cylindrical Re;

A:32 mm; L1:40 mm; Recommended tightening torque for set screw:3.7 Nm; Weight:0.53 kg; B:25 mm; C:12.8 kN; C0:6.65 kN; H2:64 mm; G:R1/8"; Designation of bearing:US204-12G2T20;

Support Type:Take-Up; Dimension H:2.0 in; Series Type:Light Series; Note:This product line wa; Maximum Speed:1740 rpm; Dimension N:16.5 in; Dimension T:20.0 in; Ca - Axial Load Rating:4990.69 lbf; Dimension X:1.7 in; Bearing Type:Split Cylindrical Re;

Type:Bearings with Housin; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Retained:No; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201; Shape:Flange Type;

A:32 mm; L1:40 mm; Recommended tightening torque for set screw:3.7 Nm; Weight:0.53 kg; B:25 mm; C:12.8 kN; C0:6.65 kN; H2:64 mm; G:R1/8"; Designation of bearing:US204-12G2T20;

Inner/Outer Ring Material:[Steel] Steel; Seal, Shield Symbols:No; Size Standards:Metric System; Material Symbol:No; Type:Angular Contact Ball; Width(mm):38; Size Standards:Metric System; Combination symbol:DB; Basic Dynamic Load Rating(N):154000; Specifications, Environment:Standard / For high;

Design Units:Imperial; R - Cone Backface To Clear Radius3:0.14 in; Series:26000; K - Factor8:1.62; G2 - Heat Generation Factor (Rib-Roller End):10.1; d:1.3125 in; Cone Part Number:26131; Ab - Cage-Cone Frontface Clearance:0.09 in; B - Cone Width:0.7450 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2500 lbf;

Min operating temperature, Tmin:-25 °C; B:16 mm; ra max:1 mm; Radial clearance class:C3; Characteristic cage frequency, FTF:0.39 Hz; D:58 mm; d:28 mm; Characteristic inner ring frequency, BPFI:4.89 Hz; Da max:53 mm; Mass:0.17 kg;

Shaft Diameter da:45 mm; H:128 mm; Housing:FSNT 511-609; Housing Mass:4.5 Kg; J2:234 mm; Bolt Qty:2; Locating Rings (width x OD):SR100X9.5; H1:70.0 mm; H2:28.00 mm; Max Grease Speed:5300;

Designation of closed end cover:SCC205; A:21 mm; T max.:100 °C; G:R1/8"; T min.:-40 °C; d:22.22 mm; C:14 kN; Weight:1.55 kg; H:78 mm; Designation of housing:SP203-205/52N-;