Gray Stripper Peanut Half Separating Machine Stripper 2.2kw / 380v

E Max.:29.5000 in; Diameter S-1:10 1/2 in; Triple Seal Reqd:ER 710; A:9.8750 in; F:5.5 in; Bolt Hole Length:3.125 in; Adapter Assembly Number1:SNP-3056 x 10-1/2; Full Timken Part Number:SAF23056K10-1/2; Bolt Holes:4; Stabilizing Ring 1 Reqd3:A8819;

Cone Part Number:EE285162; C90 - Dynamic Radial Rating (90 million revolutions)4:64600 lbf; e - ISO Factor8:0.5; da - Cone Frontface Backing Diameter:433.07 mm; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:443.99 mm; C - Cup Width:50.800 mm; D:574.675 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:55000 lbf; Db - Cup Backface Backing Diameter:533.91 mm;

J:159 mm; H1:22 mm; S:10.9 mm; B:43.5 mm; L1:65 mm; d:49.21 mm; N:20mm; H:110 mm; T min.:-40 °C; Designation of bearing:US210-31G2T04;

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:42200 lbf; G1 - Heat Generation Factor (Roller-Raceway):42; K - Factor8:1.65; G2 - Heat Generation Factor (Rib-Roller End):15.7; B - Cone Width:0.8640 in; da - Cone Frontface Backing Diameter:2.48 in; Cg - Geometry Factor:0.0859; Cone Part Number:387-S; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3810 lbf; db - Cone Backface Backing Diameter:2.52 in;

a - Effective Center Location4:-0.5 in; d:1.8750 in; Cone Part Number:528A; C1 - Dynamic Radial Rating (1 million revolutions)6:37000 lbf; B - Cone Width:1.4200 in; R - Cone Backface To Clear Radius3:0.06 in; Cg - Geometry Factor:0.0894; Design Units:Imperial; Series:525; da - Cone Frontface Backing Diameter:2.17 in;

a - Effective Center Location4:-0.5 in; d:1.8750 in; Cone Part Number:528A; C1 - Dynamic Radial Rating (1 million revolutions)6:37000 lbf; B - Cone Width:1.4200 in; R - Cone Backface To Clear Radius3:0.06 in; Cg - Geometry Factor:0.0894; Design Units:Imperial; Series:525; da - Cone Frontface Backing Diameter:2.17 in;

Designation of housing:SP203-205/47-; A5:17 mm; d:15 mm; SW:3 mm; L1:225 mm; Recommended tightening torque for set screw:5.5 Nm; d1:32.4 mm; C0:6.65 kN; G:R1/8"; T min.:-20 °C;

Stroke:No; Stroke:No; Surface Treatment:No; Grease Type:Standard Grease; Bearing Unit, Type:Take-Up Type; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Diameter series symbol:Used for Light load; Bearing Unit, Type:Take-Up Type;

Lateral Width L(mm):64; Bearing Retained:Yes (with retaining; Seals:DD (Contact Rubber S; Bearing Material:[Steel] Steel; Width T(mm):13; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):17;

a - Effective Center Location4:-0.5 in; d:1.8750 in; Cone Part Number:528A; C1 - Dynamic Radial Rating (1 million revolutions)6:37000 lbf; B - Cone Width:1.4200 in; R - Cone Backface To Clear Radius3:0.06 in; Cg - Geometry Factor:0.0894; Design Units:Imperial; Series:525; da - Cone Frontface Backing Diameter:2.17 in;

a - Effective Center Location4:-0.5 in; d:1.8750 in; Cone Part Number:528A; C1 - Dynamic Radial Rating (1 million revolutions)6:37000 lbf; B - Cone Width:1.4200 in; R - Cone Backface To Clear Radius3:0.06 in; Cg - Geometry Factor:0.0894; Design Units:Imperial; Series:525; da - Cone Frontface Backing Diameter:2.17 in;

Designation of housing:SP203-205/47-; A5:17 mm; d:15 mm; SW:3 mm; L1:225 mm; Recommended tightening torque for set screw:5.5 Nm; d1:32.4 mm; C0:6.65 kN; G:R1/8"; T min.:-20 °C;

L:178 mm; Designation of housing:T309-; B:42.9 mm; s1:42.05 mm; SW:5 mm; N2:55 mm; A:55 mm; S:19.8 mm; L2:20 mm; H:138 mm;

Designation of housing:SP203-205/47-; A5:17 mm; d:15 mm; SW:3 mm; L1:225 mm; Recommended tightening torque for set screw:5.5 Nm; d1:32.4 mm; C0:6.65 kN; G:R1/8"; T min.:-20 °C;