Full Automatic Walnut Kernel Piece Cutter Thickness Adjustable

d2:36.15 mm; d1:38.1 mm; Characteristic rolling element frequency, BSF:7.38 Hz; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:8.73 Hz; d:30 mm; Characteristic cage frequency, FTF:0.44 Hz; Brand:SNR; ra max:1 mm; Max operating temperature, Tmax:120 °C;

T min.:-40 °C; Designation of bearing:UC206-20G2T04; H2:130 mm; H1:18 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PH206-; J:121 mm; G:M6x1; Weight:1.7 kg; d:31.75 mm;

Unit, Type:Insert Bearing Unit; Seal:Triple seals; Surface Treatment:No; Diameter series symbol:Used for Light load; RoHS:6; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:Quote; Grease Type:Standard Grease; Rolling Element Material:Bearing Steel;

Series:HH224300; db - Cone Backface Backing Diameter:123.95 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:22100 lbf; B - Cone Width:66.675 mm; a - Effective Center Location3:-18.8 mm; Bearing Weight:11.2 Kg; Cup Part Number:HH224310V; e - ISO Factor8:0.33; C90 - Dynamic Radial Rating (90 million revolutions)4:39600 lbf; Cage Type:Stamped Steel;

Retainer Type:Resin Forming; Size Standards:Metric System; Clearance sign:C3; Raceway Ring Shape:Cylindrical Roller; Rolling Element Material:Steel; Bearing Ring Type:Type NU; Outer Ring:With Outer Ring; Special Configurations Code:No; Inner/Outer Ring Material:Steel; Raceway Ring Shape:Cylindrical Roller;

Cup Part Number:912400; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):3251.1; a - Effective Center Location3:11.9 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:107000 lbf; e - ISO Factor8:0.38; R - Cone Backface To Clear Radius1:6.860 mm; C - Cup Width:60.325 mm; Aa - Cage-Cone Backface Clearance:16.8 mm; C0 - Static Radial Rating:645000 lbf;

d2:36.15 mm; d1:38.1 mm; Characteristic rolling element frequency, BSF:7.38 Hz; Fatigue limit load, Cu:0.27 kN; Characteristic outer ring frequency, BPF0:8.73 Hz; d:30 mm; Characteristic cage frequency, FTF:0.44 Hz; Brand:SNR; ra max:1 mm; Max operating temperature, Tmax:120 °C;

Specifications:Standard; Revolution Frequency(rpm):8500; High-Speed Steel:Standard; Symbol of Bearing Ring Shape:No symbol: Internal; Basic Load Rating, Dynamic Rating(N):55500; Cylinder shape (suffix symbol: X):No; Holder Symbol:G1 (high tensile bra; B:18; Raceway Ring Shape:Cylindrical Roller; Inner/Outer Ring Material:Steel;

Characteristic outer ring frequency, BPF0:7.12 Hz; C:61.91 mm; Min operating temperature, Tmin:-40 °C; Mass:19.42 kg; Nlim (grease):1,400 rpm; Y0:1.03; Characteristic cage frequency, FTF:0.42 Hz; Characteristic inner ring frequency, BPFI:9.88 Hz; Static load, C0:1,070 kN; B:82.55 mm;

Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Width T(mm):45; Flange O.D. H(φ):60; Seals:ZZ (Double Shield); Days to Ship:7 Days; RoHS:6;

Days to Ship:8 Days; Stroke:No; Stroke:No; Seal:Silicone; Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Surface Treatment:No; Rolling Element Material:Bearing Steel; d:75;

Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Flange O.D. H(φ):114; Bearing Part Number:6008; Number of Bearings:Single; Shape:Flanged Pilot Type; Bearing I.D. d(mm):40; Holder Surface Treatment:Electroless Nickel P;

Characteristic outer ring frequency, BPF0:7.12 Hz; C:61.91 mm; Min operating temperature, Tmin:-40 °C; Mass:19.42 kg; Nlim (grease):1,400 rpm; Y0:1.03; Characteristic cage frequency, FTF:0.42 Hz; Characteristic inner ring frequency, BPFI:9.88 Hz; Static load, C0:1,070 kN; B:82.55 mm;

Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Flange O.D. H(φ):114; Bearing Part Number:6008; Number of Bearings:Single; Shape:Flanged Pilot Type; Bearing I.D. d(mm):40; Holder Surface Treatment:Electroless Nickel P;