Wholesale Fresh Corn shelling Machine| New Corn Peeling and Shelling Machine

N1:25 mm; Recommended tightening torque for set screw:16.8 Nm; A2:38 mm; G:M6x1; T max.:100 °C; SW:4.76 mm; d:50.8 mm; S:12 mm; C0:29.2 kN; B:32.5 mm;

A4:20.5 mm; Designation of housing:FEE205-; A1:9 mm; e:9.5 mm; S:7.5 mm; A2:32.9 mm; Designation of bearing:ES205-14G2; B1:30.9 mm; J:92 mm; H3:75;

Type:Bearings with Housin; Housing Material:[Aluminum Alloy] 201; Bearing Part Number:6803; Volume Discount:Available; Volume Discount:Available; Flange Shape:Round Type; Bearing Retained:No; Type:Bearings with Housin; Flange O.D. H(φ):50; Bearing I.D. d(mm):17;

Type:Bearings with Housin; Bearing I.D. d(mm):17; Bearing Used:Deep Groove Ball Bea; Height Indication:Height Selection; Mount Type:Key Groove Type; T(mm):25 ～ 50; Number of Bearings:Double; Days to Ship:8 Days; Bearing Retained:No; RoHS:6;

Designation of bearing:US206G2; e:18 mm; L:80 mm; J1:58 mm; C0:11.2 kN; T max.:100 °C; J:117 mm; G:M6x1; L1:72 mm; N:12mm;

A4:30 mm; s1:27.5 mm; T min.:-20 °C; A2:40.5 mm; e:13 mm; d:31.75 mm; T max.:100 °C; Weight:3.19 kg; J:112 mm; G:M6x1;

G2 - Heat Generation Factor (Rib-Roller End):5.55; da - Cone Frontface Backing Diameter:22.61 mm; R - Cone Backface To Clear Radius1:0.760 mm; Da - Cup Frontface Backing Diameter:42.40 mm; Cage Type:Stamped Steel; d:17.463 mm; K - Factor7:1.64; C90 - Dynamic Radial Rating (90 million revolutions)4:1560 lbf; e - ISO Factor8:0.36; Aa - Cage-Cone Backface Clearance:-0.3 mm;

G2 - Heat Generation Factor (Rib-Roller End):5.55; da - Cone Frontface Backing Diameter:22.61 mm; R - Cone Backface To Clear Radius1:0.760 mm; Da - Cup Frontface Backing Diameter:42.40 mm; Cage Type:Stamped Steel; d:17.463 mm; K - Factor7:1.64; C90 - Dynamic Radial Rating (90 million revolutions)4:1560 lbf; e - ISO Factor8:0.36; Aa - Cage-Cone Backface Clearance:-0.3 mm;

Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Bearing Part Number:608; RoHS:6; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Number of Bearings:Single; C Chamfered:Not Provided;

N1:25 mm; Recommended tightening torque for set screw:16.8 Nm; A2:38 mm; G:M6x1; T max.:100 °C; SW:4.76 mm; d:50.8 mm; S:12 mm; C0:29.2 kN; B:32.5 mm;

Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Bearing Part Number:608; RoHS:6; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Number of Bearings:Single; C Chamfered:Not Provided;

G2 - Heat Generation Factor (Rib-Roller End):26.3; Da - Cup Frontface Backing Diameter:4.53 in; Y2 - ISO Factor6:2.79; G1 - Heat Generation Factor (Roller-Raceway)7:98.4; r - Cup Frontface To Clear Radius2:0.03 in; Y1 - ISO Factor5:1.87; C - Double Cup Width:2.3125 in; K - Factor3:1.62; Cg - Geometry Factor8:0.115; Series:47400;

Dimension L2:12.70 mm; Height H2:63.5 mm; Shaft Length L1:74.6 mm; Seal Type:Molded Shroud; Opening Height N2:36.5 mm; Center of Bearing from End S:9.5 mm; Series:Standard; Dynamic Load Rating:6400 lbf; Dimension T:0.874 in; Total Height H:104.8 mm;

Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Bearing Part Number:608; RoHS:6; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Number of Bearings:Single; C Chamfered:Not Provided;

A4:20.5 mm; Designation of housing:FEE205-; A1:9 mm; e:9.5 mm; S:7.5 mm; A2:32.9 mm; Designation of bearing:ES205-14G2; B1:30.9 mm; J:92 mm; H3:75;