Full-automatic Donkey meat and Continuously Microwave Defrosting and Heating Machinery

Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Nlim (grease):20,000 rpm; Da max:24 mm; Characteristic rolling element frequency, BSF:3.47 Hz; ra max:0.3 mm; Characteristic inner ring frequency, BPFI:4.44 Hz; Mass:0.02 kg; Characteristic cage frequency, FTF:0.37 Hz; Radial clearance class:CN;

Rolling Element Material:[Steel] Steel; Basic Dynamic Load Rating(N):41000; RoHS:6; Special Configurations Code:No; Retainer Type:Resin Forming; Size Standards:Metric System; Precision Grade Symbol:P4; Clearance sign:CN (standard); Holder Symbol:TYN; Outer Ring Shape:Flat;

e:0.21; b:10.5 mm; Nlim:2,900 rpm; Characteristic cage frequency, FTF:0.45 Hz; Number of lubrication holes:3; Characteristic inner ring frequency, BPFI:13.86 Hz; Y2:4.77; D:240 mm; Characteristic outer ring frequency, BPF0:11.14 Hz; Characteristic rolling element frequency, BSF:8.99 Hz;

Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Nlim (grease):20,000 rpm; Da max:24 mm; Characteristic rolling element frequency, BSF:3.47 Hz; ra max:0.3 mm; Characteristic inner ring frequency, BPFI:4.44 Hz; Mass:0.02 kg; Characteristic cage frequency, FTF:0.37 Hz; Radial clearance class:CN;

Radial clearance class:C3; D:40 mm; e:0.31; Min operating temperature, Tmin:-20 °C; da min:21 mm; Static load, C0:2.01 kN; Nlim (oil):20,000 rpm; ra max:0.6 mm; Max operating temperature, Tmax:120 °C; rs min:0.6 mm;

Weight:1.53 kg; T min.:-20 °C; G:M10x1,25; B:65.1 mm; d:60 mm; T max.:100 °C; r:1.1; C0:32.8 kN; S:25.4 mm; SW:5 mm;

Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Nlim (grease):20,000 rpm; Da max:24 mm; Characteristic rolling element frequency, BSF:3.47 Hz; ra max:0.3 mm; Characteristic inner ring frequency, BPFI:4.44 Hz; Mass:0.02 kg; Characteristic cage frequency, FTF:0.37 Hz; Radial clearance class:CN;

Lockwasher and Lockplates:P-530; S:2.859 in; Diameter d :18 15/16 in; Locknut:N-530; Series:223K and 232K; Taper:1:12; Tolerance1:-0.007 in; Sleeve:S-32/530 x 18 15/16; B2:17.271 in; D1:24.818 in;

Weight:1.53 kg; T min.:-20 °C; G:M10x1,25; B:65.1 mm; d:60 mm; T max.:100 °C; r:1.1; C0:32.8 kN; S:25.4 mm; SW:5 mm;

O.D.(Ø):180; Preload:Normal preload; Precision:Grade 5; I.D.(Ø):100; Contact angle(Degree):15; Type symbol:No; Outer Ring Shape:Flat; Width(mm):34; Special Configurations Code:No; Inner/Outer Ring Material:[Steel] Steel;

Fatigue limit load, Cu:30.2 kN; ra max:1.5 mm; Mass:1.68 kg; Number of lubrication holes:0; Dynamic load, C:244 kN; Characteristic inner ring frequency, BPFI:10.87 Hz; Nref:4,600 rpm; e:0.22; Max operating temperature, Tmax:200 °C; Characteristic rolling element frequency, BSF:6.71 Hz;

O.D.(Ø):180; Preload:Normal preload; Precision:Grade 5; I.D.(Ø):100; Contact angle(Degree):15; Type symbol:No; Outer Ring Shape:Flat; Width(mm):34; Special Configurations Code:No; Inner/Outer Ring Material:[Steel] Steel;

Machining:No; Grease Type:SH44M; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Fit:J7; Diameter series symbol:For Heavy Load; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Unit, Type:Insert Bearing Unit;

T max.:200 °C; Weight:2.39 kg; Dz:100 mm; Designation of bearing:UC210-30G2T20; Designation of housing:FA210N-; e:22 mm; Recommended tightening torque for set screw:16.8 Nm; A1:18 mm; L:115 mm; B:51.6 mm;