Microwave tire Pyrolysis and Assisted Extraction System

Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; d:40; Grease Type:Standard Grease; RoHS:6; Accessory:With steel plate cov; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Basic Load Rating, Static Rating(N):23300;

Rolling Element Material:Steel; Series:No Inner Wheel; Raceway Ring Shape:Needle Roller; Revolution Frequency(rpm):5500; Outer Ring:With Outer Ring; Sealing Structure:Brim Type; Outer Ring Type:Flat; Raceway Ring Shape:Needle Roller; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Double Row;

Bolt Size:4 x M16; Ca - Axial Load Rating:4181.39 lbf; Seal Type:Kevlar Packing Seal; Cr - Dynamic Load Rating:71040 lbf; Bearing Type:Split Cylindrical Re; Bearing - Housing - Seal UPC:013992089687; Dimension N:10.875 in; Bearing UPC:013992026811; Bearing - Housing - Seal:LSE408BRHKPS; Note:This product line wa;

C:19.5 kN; Designation of bearing:UC206G2L3; Dz:70 mm; N:12mm; T min.:-20 °C; Z:44.4 mm; J:100 mm; Designation of closed end cover:SCC206; e:10 mm; Recommended tightening torque for set screw:5.5 Nm;

C:19.5 kN; Designation of bearing:UC206G2L3; Dz:70 mm; N:12mm; T min.:-20 °C; Z:44.4 mm; J:100 mm; Designation of closed end cover:SCC206; e:10 mm; Recommended tightening torque for set screw:5.5 Nm;

C:19.5 kN; Designation of bearing:UC206G2L3; Dz:70 mm; N:12mm; T min.:-20 °C; Z:44.4 mm; J:100 mm; Designation of closed end cover:SCC206; e:10 mm; Recommended tightening torque for set screw:5.5 Nm;

Bearing Part Number:623; Type:Bearings with Housin; RoHS:6; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):33; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea;

Fatigue limit load, Cu:1.41 kN; D:100 mm; B:25 mm; Characteristic inner ring frequency, BPFI:4.45 Hz; d:35 mm; Mass:0.95 kg; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; ra max:1.5 mm; Nlim (grease):7,800 rpm;

Fatigue limit load, Cu:1.41 kN; D:100 mm; B:25 mm; Characteristic inner ring frequency, BPFI:4.45 Hz; d:35 mm; Mass:0.95 kg; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; ra max:1.5 mm; Nlim (grease):7,800 rpm;