Specifications:
| Model | Maximum load | Heater power | rotate speed | Power | Horsepower | Dimension (mm) | Inside the bucket size(mm) |
| 35L | 35KG | 3KW | 630 rpm | 0.75 KW | 1 HP | 850×700×900 | 400×300 |
| 70L | 70KG | 3KW | 530 rpm | 1.1 KW | 1.5 HP | 910×750×1000 | 500×400 |
Working Principle:
The material is placed on the conveyor belt, through the switch-plate device on the conveyor belt, spread the belt evenly, the material through the first layer transition to the next layer, each layer set guide material device and rollover device. make the material fully contact with the heating medium, dried material will be discharged by the last layer.
The heating medium enters into the dryer machine by the fan, wind speed induced draft fan-generated pressure to make adequate and uniform spread in the dryer at the bottom of the heating medium, since the lower pressure is greater than the above pressure, the upward movement of the heating medium through each belt, so that the material in contact with the heat medium sufficiently, improve drying efficiency.
Our Sevices:
After sale service
1.24 hours technical support by phone, email/whatsapp/skype/wechat.
2.For the whole equipment,warranty is 12 months,within 12 months,if there‘s any equipment quality problem, we will provide accessories freely.
3.After the expiration of the warranty period,if there's any spare parts problem,we only charge the cost of required replacement parts.
4.We commit providing free technical support of equipment all whole life.
