Quick Detail:
Inner Size (W*H*D) | 60*50*50CM |
Accuracy | controlling accuracy: ±0.5℃ |
Temperature distribution: | ±1.0℃%(no-load) |
Temperature range | Room temperature~300℃/400℃ |
Rate of work: | About 4.5 KW |
Power | AC220V 50Hz |
Characteristics:
1.The heating source is a microwave generator.
2.Microwave heating, raw material is heated evenly,and the cavity environment is not heated,no heat loss
3.Controlled by PLC, temperature, speed, spreading thickness and other parameters can be set, and then stored in PLC, achieved one key to boot and a key off in future production
4.It didn’t need preheating, didn’t depend on the artificial experience, save time and effort
5.Compared with other methods, it is clean, environmental. and for the material composition is not affected.
Our Srevices
-- Before sale service
1.Provide the free consultation of the equipment.
2.Provide the standard device and the flow chart.
3. According to the clients' special requirement, offering the reasonable plan and free design helping to select the equipment.
--Services during the sales:
1.Help client design the factory and offering professional advice, free engineering drawing for the factory layout
2.Welcome to visit our factory or the domestic clients' factory.
3.Inspect the machine before leaving the factory.
--After sale services:
1. Oversea install and debug the equipment.
2. Train the first-line operator.
3. Provide the basic formula.
4. Operation/ Service/ Maintenance Manual: Provided In English.
5. 1-2 engineers will be arranged for customer